学校简介

挪威公立大学阿哥德大学（挪威文为Universitetet i Agder）,原名阿哥德学院（Agder University College），是挪威最大的高等教育机构之一。阿哥德学院于1994年由位于Kristiansand, Grimstad and Arendal市的6所学院合并而成。

招聘职位

阿格德尔大学工程与科学学院提供100%的职位（全额资助），担任阿格德尔大学工程科学系附属海上风能机电一体化博士研究员，为期三年。该职位目前位于格里姆斯塔德校区。开始日期可与教师协商。

A 100 % position (fully-funded) is available at the University of Agder, Faculty of Engineering and Science as a PhD Research Fellow in Mechatronics in Offshore Wind Energy affiliated to the Department of Engineering Sciences, University of Agder, for a period of three years. The position is located, at the present, at Campus Grimstad. The starting date is negotiable with the faculty.

研究目标

海上风能在向清洁/绿色能源过渡中发挥着重要作用。尽管世界各地正在进行许多伟大的研究工作，但许多挑战尚未克服。这项博士研究将重点关注海上风能的新兴技术。因此，该博士职位的主要任务是在海上风能应用的自主机器人和设备的设计，建模，仿真，控制和原型设计中开发新概念。除了实验工作外，还将应用先进的设计、建模和数值模拟工具、不确定性分析的随机理论、优化方法和控制策略。

Offshore wind energy plays an important role in the transition to clean/green energy. Although many great research efforts are ongoing around the world, many challenges are yet to be overcome. This PhD study will focus on emerging technologies in offshore wind energy. As such, the main task of this PhD position is the development of novel concepts in the design, modeling, simulation, control, and prototyping of autonomous robots and equipment for offshore wind energy applications. Advanced design, modeling and numerical simulation tools, stochastic theory for the uncertainty analysis, optimization methods, and control strategies in addition to experimental efforts are expected to be applied during the study.

任职资格

◆申请人必须具有机械工程、机电一体化、机器人或类似工程学科的硕士(或同等学历)学位。已经进入硕士课程最后一个学期的学生也有资格申请。在2023年7月1日之前完成理学硕士学位，并且在最后的理学硕士项目中达到B级(或同等学历)或更高。

◆具有机械/机器人系统设计、动力学、控制、多体动力学、机器人技术和原型设计的基础知识。

◆扎实的Matlab或类似平台编程背景或经验。

◆具有传感器和电动执行器的基础知识和实验背景。

◆良好的英语听说读写能力。

就业的先决条件是，候选人必须被UiA工程与科学学院的博士课程录取:

机电工程研究生学位或学院认为同等的资格。申请进入工程与科学学院博士课程，申请人必须符合以下要求:

◆持有挪威大学相关学科领域的硕士学位或同等学历。

◆具有与挪威硕士学位水平相对应的教育资格和证书，经个人评估，可作为入学的基础。接受过少于5年教育的申请人必须做好准备，他们将面临额外的要求，并且他们只会收到有条件的录取通知。

作为一般规则，应适用以下规定:

◆学士学位（或同等学历）所含课程的平均成绩应为C（或同等学历）或更高。

◆硕士学位（或同等学历）课程的平均成绩应为B（或同等学历）或更高。

◆硕士论文（或同等学历）应具有B级（或同等学历）或更高。

当申请人的平均成绩低于要求时，工程与科学学院的主办研究小组必须记录申请人完成博士课程的能力。在这种情况下，工程与科学学院可能会建议将额外的要求纳入入学基础。

英语能力是所有博士课程申请人的要求。根据挪威教育质量保证局（NOKUT）的指导方针，未免除英语语言要求的国际候选人必须通过以下测试之一进行记录，并取得规定的结果或更好：

◆托福 - 英语作为外语考试，纸笔考试（PBT）最低分数为600分，互联网考试（iBT)最低分数为92分

◆雅思 - 国际英语语言测试系统，成绩为6.5

◆Applicants must have an MSc (or equivalent) degree in mechanical engineering, mechatronics, robotics, or a similar engineering discipline. Students who are already in the last semester of their MSc education are also eligible to apply. Completion of MSc degree before July 1st 2023 and with the grade B (or equivalent) or higher in the final MSC project is also required.

◆Fundamental knowledge in the design of mechanical/robotics systems, dynamics, control, multibody dynamics, robotics, and prototyping.

◆ Solid background or experience in programming in Matlab or similar platforms.

◆ Experimental work and prototyping .

◆Fundamental knowledge and experimental background in sensors and electrical actuators.

◆ Good knowledge of English, both written and oral, is also required.

A prerequisite for employment is that the candidate is to be admitted to UiA’s PhD program at the Faculty of Engineering and Science:

Graduate degree in mechatronics engineering or qualifications considered by the Faculty to be equivalent. To be admitted into the PhD program at the Faculty of Engineering and Science, the applicant must meet the following requirements:

◆Hold a master's degree in a relevant subject area from a Norwegian university or qualifications approved as equivalent.

◆Have educational qualifications and credentials corresponding to a Norwegian master's degree level which upon individual evaluation are approved as a basis for admission. Applicants with an education of less than 5 years must expect that additional requirements will be imposed upon them, and that they will only receive a conditional offer of admission.

As a general rule, the following should apply:

◆The average grade for courses included in the bachelor's degree (or equivalent) should be C (or equivalent) or higher.

◆ The average grade for courses included in the master's degree (or equivalent) should be B (or equivalent) or higher.

◆ The master's thesis (or equivalent) should have the grade B (or equivalent) or higher.

When the applicant's average grades are lower than required, the hosting research group at the Faculty of Engineering and Science must document the applicant’s ability to complete the PhD program. In such an event, the Faculty of Engineering and Science may recommend extra requirements to be included in the basis for admission.

Competence in English is a requirement for all applicants to the PhD program. International candidates that are not exempt from the English language requirements pursuant to the guidelines of the Norwegian Agency for Quality Assurance in Education (NOKUT), must document this through one of the following tests with the stated results or better:

◆TOEFL - Test of English as a Foreign Language with a minimum score of 600 for the Paper based Test (PBT), or 92 for the Internet-based Test (iBT).

◆IELTS - International English Language Testing System, with the result of 6.5.

其他条件

◆有海上风电相关工作经验。

◆较强的编程和分析能力。

◆扎实的数学和物理背景。

◆有研究和出版科学著作的经验。

◆不确定性系统的建模与仿真。

◆数据采集。

职位福利

我们提供:

◆复杂系统工业研究学院的会员资格和参与资格。

◆在一个令人兴奋且具有社会影响力的大型组织中获得专业发展。

◆积极、包容、多元的工作环境。

◆为挪威公共服务养老基金成员。

We offer

◆ membership and participation in Industrial Research School in Complex Systems.

◆ professional development in a large, exciting and socially influential organisation.

◆ a positive, inclusive and diverse working environment.

◆ modern facilities and a comprehensive set of welfare offers .

◆ membership of the Norwegian Public Service Pension Fund.

申请方式

申请和任何必要的教育和经验信息(包括文凭和证书)都将以电子方式发送至邮箱：info@zhengzicn.com

以下文件必须以电子方式上传:

★求职动机/求职信:申请人需要在机械/机器人系统设计方面表现出强大的能力，以及对动力学、建模和控制原理的全面理解。他们还需要证明为什么他们很适合这个职位。

★个人简历:包括但不限于学历、学术(理论和实验)工作和研发项目、发表作品清单、项目相关课程清单、编程熟练程度、设计、建模、仿真软件工具使用经验。简历没有页数限制。

★职系证书

★硕士论文(适用于已获得硕士学位的申请人)

★推荐信

★英语语言能力证明文件(请参阅本节)

★项目描述，最多两页，不包括参考列表。大纲应该在给定的框架内提出和讨论可能的研究问题、理论观点和方法。

★其他相关文件。

申请人有责任在截止日期前提交完整的数字文件，所有文件必须以斯堪的纳维亚语言或英语提供。

申请截止日期:2023年12月1日。

The application and any necessary information about education and experience (including diplomas and certificates) are to be sent electronically. 

The following documentation must be uploaded electronically:

◆Motivation/cover letter: The applicants are expected to exhibit a robust proficiency in mechanical/robotic system design, as well as a comprehensive understanding of dynamics, modelling, and control principles. They also need to demonstrate why they are a good fit for this position.

◆CV: including but not limited to, educational background, academic (theoretical and experimental) work and R&D projects, list of publications, list of courses relevant to this project, proficiency in programming, as well as experience with design, modeling, and simulation software tools. There is no page limit for CV.

Certificates with grades

◆Master’s thesis (This applies to the applicants who have already been granted the MS degree.)

◆References

◆Document verifying English language proficiency (please see the section “Admission in Engineering and Science”)

◆Project description with a maximum scope of two pages, excluding reference list. The outline should present and discuss possible research questions, theory perspectives, and methods within the given framework.

◆Any other relevant documentation

The applicant is fully responsible for submitting complete digital documentation before the closing date. All documentation must be available in a Scandinavian language or English.

Application deadline: 01.12.23.